Transcription

Cable Support SystemsFeaturing the nVent CADDY CAT HP J-Hook System

Why nVent CADDY Cat HP?WHY CHOOSE CAT HP OVERTRAY?FAST AND EASY TO INSTALL Much faster installation compared toconventional cable or ladder tray One person can install J-Hooks, trayinstallation requires two or more people No grounding or bonding required No extra components to installSIMPLER SOLUTION Tray requires an additional supportstructure - nVent CADDY Cat HP does not Eliminates the need for special tools orconnection fittings J-Hooks allow for easy, no-costdirectional and level changesWHY CHOOSE CAT HP OVEROTHER NON-CONTINUOUS SUPPORTS? Designed to help meet the requirements for highperformance data cables Sturdy steel construction with superior cable capacityand load ratingJ-Hooks are available pre-galvanized orpainted to aid in the identification andorganization of the pathway application2 nVent.com/CADDY Fire rated solution to comply with project requirements

DESIGNED TO HELP MEET THE REQUIREMENTSFOR HIGH PERFORMANCE DATA CABLESThe highly engineered Cat HP J-Hooks feature a 3” (76 mm) bend radius and complywith TIA standards for Cat 6A, Cat 7, and fiber optic cables. Many alternative J-Hookproducts do not meet the minimum bend radius required to install or support modern highperformance data cables.Cat HPJ-HooksOtherCompetitorswith a 1”bend radiusCableTypeAvg.DiameterBend RadiusRequirementMinimalBendRadiusCAT 5e0.21"4x0.84"YYCAT 60.23"4x0.92"YYCAT 6a0.30"4x1.20"YNCAT 7 (SFTP)0.29"8x2.32"YNFiber Optic (plenum)0.20"10 – 15x2.0" - 3.0"YNFIRE RATED SOLUTION TOCOMPLY WITH PROJECTREQUIREMENTSThe J-Hooks have a wide basedesign and smooth bevelededges to provide a largebending radius for current andfuture high-performance datacables and fibre optics.STURDY STEEL CONSTRUCTION WITH SUPERIORCABLE CAPACITY AND LOAD RATINGCat HP J-Hooks have been tested toDIN 4102-12 and meet the requirementsof E30 and E90. When projectspecifications call for a fire rated cablepathway, Cat HP J-Hooks are an idealsolution.J-Hooks and cables in fire chamberbefore fire testCat HP J-Hooks feature superior stamped steel construction and up to 4” diametercarrying capacity that can support up to 140 Cat 6A or Cat 7 high performance cables.Cat HP J-Hooks are tested and certified to an industry-leading static load rating of up to60 pounds.nVent.com/CADDY 3

Cat HP ComponentsFEATURES: Fully-versatile J-Hook solution with interchangeable fasteners andsupport brackets Ideal for projects that require flexibility to adapt cable pathways onthe jobsite Customized J-Hook trees can be easily assembled with variousJ-Hook sizes, colors and configurations Multiple color options aid in the identification and organization of thepathway applicationFlangePurlinCOMPONENT ASSEMBLYJ-HOOK TREE ASSEMBLY4 nVent.com/CADDYRod/WireTree BracketPedestalAngle BracketStraight Bracket

Cat HP AssembliesFEATURES: Pre-assembled; saving installation time & labor Ideal for new construction or when the structural attachmentrequirements are well understood Provides optimal support for high-performance data cable*, includingCAT6, CAT6A, CAT7 and fiber optics Single- or double-sided tree configurations provide multiple J-Hookswith one structural attachment* Cat HP meets TIA-568-C and TIA-569-C requirementsnVent.com/CADDY 5

Cable Support SystemsNVENT CADDY CAT HP J-HOOK SYSTEMPAGES 7-37Our most advanced J-Hook support solution. Highly engineered featureshelp to ensure a stable and secure installation for high-performance cables.NVENT CADDY CAT CM CABLE SUPPORT SYSTEMPAGES 38-41Specially designed U-Hooks and double J-Hooks have large-diameter,rounded support surfaces/edges to avoid overbending and kinking of cables.NVENT CADDY CAT 425 ADJUSTABLE CABLE SUPPORTSPAGES 42-46Adjustable fabric cable support can be mounted to overhead buildingstructure or wall-mounted for low-profile installations.6 nVent.com/CADDY

CAT HP J-HOOKCat HP J-Hook SystemThe Cat HP J-Hook System is an advanced, non-continuous pathway support solution for today’s high-performance cabling systems.Highly engineered features help ensure a stable and secure installation that complies with industry codes and standards for highperformance cables.The Cat HP System is a cost-effective alternative to using wire mesh cable tray, ladder tray or similar complex alternatives. It requiressignificantly less material and installs in a fraction of the time of other methods. This versatile solution accommodates a widerange of attachment methods and is available as individual J-Hooks, pre-built Cat HP assemblies and multi-tiered trees, as well asinterchangeable Cat HP components. The Cat HP J-Hook System provides the perfect combination of performance, time savings andversatility required by today’s datacom and electrical contractors. Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Typically requires less time, labor and material for installation compared to cable tray systems Requires no screws, rivets or special tools for assembly Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Offers a variety of attachment methods Engineered to accommodate future emerging data cables Recyclable and is produced with up to 80% recycled steel Uses up to 88% less material by weight than traditional cable tray methods Complies with EN 50174-2 Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-CCAT HP J-HOOKCAT HP ASSEMBLIESPAGES 7-9PAGE 10-22Non-continuous pathway supportsolution with a wide base design andsmooth beveled edges to provide a largebending radius for high-performancedata cables and fibre optics.Pre-built assemblies comprisinga high-performance J-Hook andstructure attachment, ready touse out of the box.CAT HP J-HOOK TREESCAT HP COMPONENTSPAGES 23-36PAGES 27-35Pre-assembled trees comprisingstructural attachment and multiple tiers ofCat HP J-Hooks in single- or double-sidedconfigurations for segregating cable runs.Structure attachments and bracketsfor linking high performance J-Hooksto building structure or to each otherin tree configurations.CAT HP ACCESSORIESPAGES 36-37Accessories for the Cat HP System,designed to simplify installation.nVent.com/CADDY 7

Cat HP J-HookCAT HP J-HOOKCat HP J-Hooks are the heart of the Cat HP System. The J-Hooks have a wide base design and smooth beveled edges to provide a largebending radius for current and future high-performance data cables and fibre optics. Cat HP J-Hooks are available in a wide range ofsizes to offer a solution that meets industry standards for Cat 6A and easily accommodates Cat 7, large-diameter fibre optic, innerductand coax cable. Individual Cat HP J-Hooks can be fastened directly to the building structure or can be used to expand existing Cat HPJ-Hook cable supports. The J-Hooks are designed to provide a strong and stable pathway support installation. Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Multiple color options aid in the identification and organization of the pathway application Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Tested according to DIN 4102-12 Complies with EN 50174-2 Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-CØFMaterial: Steel Part NumberAreaCable Capacity,Cat 5eCableCapacity, Cat 6Cable Capacity,Cat 6ADiameterØStatic LoadFApprovalsFinish: Pre-galvanizedCAT16HP1.07 in²2015101”60 lbcULus CAT21HP2.29 in²5040251 5/16”60 lbcULus CAT32HP3.97 in²9060352”60 lbcULus CAT48HP9.26 in²200150803”60 lbcULus CAT64HP15.48 in²3302201404”60 lbcULus 8 nVent.com/CADDY

Part NumberAreaCable Capacity,Cat 5eCable Capacity,Cat 6Cable Capacity,Cat 6ADiameterØStatic LoadFApprovalsCAT16HPBA1.07 in²2015101”60 lbcULus CAT21HPBA2.29 in²5040251 5/16”60 lbcULus CAT32HPBA3.97 in²9060352”60 lbcULus CAT48HPBA9.26 in²200150803”60 lbcULus CAT64HPBA15.48 in²3302201404”60 lbcULus Finish: Pre-galvanized, Painted – Color: BlueCAT16HPBU1.07 in²2015101”60 lbcULus CAT21HPBU2.29 in²5040251 5/16”60 lbcULus CAT32HPBU3.97 in²9060352”60 lbcULus CAT48HPBU9.26 in²200150803”60 lbcULus CAT64HPBU15.48 in²3302201404”60 lbcULus Finish: Pre-galvanized, Painted – Color: GreenCAT16HPGR1.07 in²2015101”60 lbcULus CAT21HPGR2.29 in²5040251 5/16”60 lbcULus CAT32HPGR3.97 in²9060352”60 lbcULus CAT48HPGR9.26 in²200150803”60 lbcULus CAT64HPGR15.48 in²3302201404”60 lbcULus Finish: Pre-galvanized, Painted – Color: OrangeCAT16HPOR1.07 in²2015101”60 lbcULus CAT21HPOR2.29 in²5040251 5/16”60 lbcULus CAT32HPOR3.97 in²9060352”60 lbcULus CAT48HPOR9.26 in²200150803”60 lbcULus CAT64HPOR15.48 in²3302201404”60 lbcULus Finish: Pre-galvanized, Painted – Color: RedCAT16HPRD1.07 in²2015101”60 lbcULus CAT21HPRD2.29 in²5040251 5/16”60 lbcULus CAT32HPRD3.97 in²9060352”60 lbcULus CAT48HPRD9.26 in²200150803”60 lbcULus CAT64HPRD15.48 in²3302201404”60 lbcULus Finish: Pre-galvanized, Painted – Color: WhiteCAT16HPWH1.07 in²2015101”60 lbcULus CAT21HPWH2.29 in²5040251 5/16”60 lbcULus CAT32HPWH3.97 in²9060352”60 lbcULus CAT48HPWH9.26 in²200150803”60 lbcULus CAT64HPWH15.48 in²3302201404”60 lbcULus Finish: Pre-galvanized, Painted – Color: YellowCAT16HPYL1.07 in²2015101”60 lbcULus CAT21HPYL2.29 in²5040251 5/16”60 lbcULus CAT32HPYL3.97 in²9060352”60 lbcULus CAT48HPYL9.26 in²200150803”60 lbcULus CAT64HPYL15.48 in²3302201404”60 lbcULus Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a 70% fill rate.nVent.com/CADDY 9CAT HP J-HOOKFinish: Pre-galvanized, Painted – Color: Black

Cat HP AssembliesCAT HP ASSEMBLIESCat HP assemblies are the fastest CATs in the Cat HP family by providing a high-performance J-Hook solution in a single assembly. Theyare ready to use right out of the box with a broad range of attachment methods. Cat HP assemblies are ideal for new construction orwhen the structural attachment requirements are well understood and installation speed is critical. Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Ready to use out of the box, saving installation time and labor Available in a variety of attachment methods, including beam flanges, purlin, rod or wire, T-Grid and other common mounting configurations Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-CCat HP J-Hook toFlangeCat HP J-Hook toPurlinCat HPJ-Hook to Rod/WireCat HPJ-Hook to PedestalCat HP J-Hook toStrutCat HP J-Hook toT-Grid10 nVent.com/CADDYCat HPJ-Hook to Concrete

Cat HP J-Hook with BC200 Beam ClampFTØF Easy installation to beam flanges Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Cost effective alternative to expensive cable tray Complies with EN 50174-2Material: SteelFinish: Pre-galvanizedPart NumberAreaCableCapacity,Cat 5eCableCapacity,Cat 6CableCapacity,Cat 6ADiameterØFlangeThicknessFTStatic LoadFApprovalsCAT16HPBC2001.07 in²2015101”1/2” Max60 lbcULus CAT21HPBC2002.29 in²5040251 5/16”1/2” Max60 lbcULus CAT32HPBC2003.97 in²9060352”1/2” Max60 lbcULus CAT48HPBC2009.26 in²200150803”1/2” Max60 lbcULus CAT64HPBC20015.48 in²3302201404”1/2” Max60 lbcULus Setscrew must be tightened and torqued onto the sloped side of the I-beam.Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a 70% fill rate.nVent.com/CADDY 11CAT HP ASSEMBLIES Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-C

Cat HP J-Hook with BC200 Beam Clamp, SwivelFTØF Easy installation to beam flanges Swivels to support various directional runs of cable Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Cost effective alternative to expensive cable tray Complies with EN 50174-2 Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-CCAT HP ASSEMBLIESMaterial: SteelFinish: Pre-galvanizedPart NumberAreaCableCapacity,Cat 5eCableCapacity,Cat 6CableCapacity,Cat 6ADiameterØFlangeThicknessFTStatic LoadFCAT16HPBC200B1.07 in²2015101”1/2” Max60 lbApprovalscULus CAT21HPBC200B2.29 in²5040251 5/16”1/2” Max60 lbcULus CAT32HPBC200B3.97 in²9060352”1/2” Max60 lbcULus CAT48HPBC200B9.26 in²200150803”1/2” Max60 lbcULus CAT64HPBC200B15.48 in²3302201404”1/2” Max60 lbcULus Setscrew must be tightened and torqued onto the sloped side of the I-beam.Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a 70% fill rate.12 nVent.com/CADDY

Cat HP J-Hook with BC Beam ClampFTØF Easy installation to beam flanges Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Cost effective alternative to expensive cable tray Complies with EN 50174-2Material: Steel, Spring SteelFinish: Pre-galvanized, nVent CADDY ArmourPart NumberAreaCableCapacity,Cat 5eCableCapacity,Cat 6CableCapacity,Cat 6ADiameterØFlangeThicknessFTStatic LoadFCAT16HPBC1.07 in²2015101”1/2” Max60 lbApprovalscULus CAT21HPBC2.29 in²5040251 5/16”1/2” Max60 lbcULus CAT32HPBC3.97 in²9060352”1/2” Max60 lbcULus CAT48HPBC9.26 in²220140803”1/2” Max60 lbcULus CAT64HPBC15.48 in²3302201404”1/2” Max60 lbcULus Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a 70% fill rate.nVent.com/CADDY 13CAT HP ASSEMBLIES Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-C

Cat HP J-Hook with BC Beam Clamp, SwivelFTØF Easy installation to beam flanges Swivels to support various directional runs of cable Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Cost effective alternative to expensive cable tray Complies with EN 50174-2 Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-CCAT HP ASSEMBLIESMaterial: Steel, Spring SteelFinish: Pre-galvanized, ArmourPart NumberAreaCableCapacity,Cat 5eCableCapacity,Cat 6CableCapacity,Cat 6ADiameterØFlangeThicknessFTStatic LoadFApprovalsCAT16HPBCB1.07 in²2015101”1/2” Max60 lbcULus CAT21HPBCB2.29 in²5040251 5/16”1/2” Max60 lbcULus CAT32HPBCB3.97 in²9060352”1/2” Max60 lbcULus CAT48HPBCB9.26 in²200150803”1/2” Max60 lbcULus CAT64HPBCB15.48 in²3302201404”1/2” Max60 lbcULus Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a 70% fill rate.14 nVent.com/CADDY

Cat HP J-Hook with Hammer-On Flange ClipFTØF Requires only a hammer to install Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Cost effective alternative to expensive cable tray Complies with EN 50174-2Material: Steel, Spring SteelFinish: Pre-galvanized, ArmourPart NumberAreaCableCapacity,Cat 5eCableCapacity,Cat 6CableCapacityCat 6ADiameterØFlangeThicknessFTStatic LoadFApprovalsCAT16HP24SM1.07 in²2015101”1/8” – 1/4”60 lbcULus CAT16HP58SM1.07 in²2015101”5/16” – 1/2”60 lbcULus CAT16HP912SM1.07 in²2015101”1/2” – 3/4”60 lbcULus CAT21HP24SM2.29 in²5040251 5/16”1/8” – 1/4”60 lbcULus CAT21HP58SM2.29 in²5040251 5/16”5/16” – 1/2”60 lbcULus CAT21HP912SM2.29 in²5040251 5/16”1/2” – 3/4”60 lbcULus CAT32HP24SM3.97 in²9060352”1/8” – 1/4”60 lbcULus CAT32HP58SM3.97 in²9060352”5/16” – 1/2”60 lbcULus CAT32HP912SM3.97 in²9060352”1/2” – 3/4”60 lbcULus CAT48HP24SM9.26 in²200150803”1/8” – 1/4”60 lbcULus CAT48HP58SM9.26 in²200150803”5/16” – 1/2”60 lbcULus CAT48HP912SM9.26 in²200150803”1/2” – 3/4”60 lbcULus CAT64HP24SM15.48 in²3302201404”1/8” – 1/4”60 lbcULus CAT64HP58SM15.48 in²3302201404”5/16” – 1/2”60 lbcULus CAT64HP912SM15.48 in²3302201404”1/2” – 3/4”60 lbcULus Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a 70% fill rate.nVent.com/CADDY 15CAT HP ASSEMBLIES Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-C

Cat HP J-Hook with Hammer-On Flange Clip, SwivelFTØF Requires only a hammer to install Swivels to support various directional runs of cable Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Cost effective alternative to expensive cable tray Complies with EN 50174-2 Meets ISO /IECSM 14763-2, TIA 568-C and TIA 569-CCAT HP ASSEMBLIESMaterial: Steel, Spring SteelFinish: Pre-galvanized, ArmourPart NumberAreaCableCapacity,Cat 5eCableCapacity,Cat 6CableCapacity,Cat 6ADiameterØFlangeThicknessFTStatic LoadFApprovalsCAT16HP241.07 in²2015101”1/8” – 1/4”60 lbcULus CAT16HP581.07 in²2015101”5/16” – 1/2”60 lbcULus CAT16HP9121.07 in²2015101”1/2” – 3/4”60 lbcULus CAT21HP242.29 in²5040251 5/16”1/8” – 1/4”60 lbcULus CAT21HP582.29 in²5040251 5/16”5/16” – 1/2”60 lbcULus CAT21HP9122.29 in²5040251 5/16”1/2” – 3/4”60 lbcULus CAT32HP243.97 in²9060352”1/8” – 1/4”60 lbcULus CAT32HP583.97 in²9060352”5/16” – 1/2”60 lbcULus CAT32HP9123.97 in²9060352”1/2” – 3/4”60 lbcULus CAT48HP249.26 in²200150803”1/8” – 1/4”60 lbcULus CAT48HP589.26 in²200150803”5/16” – 1/2”60 lbcULus CAT48HP9129.26 in²200150803”1/2” – 3/4”60 lbcULus CAT64HP2415.48 in²3302201404”1/8” – 1/4”60 lbcULus CAT64HP5815.48 in²3302201404”5/16” – 1/2”60 lbcULus CAT64HP91215.48 in²3302201404”1/2” – 3/4”60 lbcULus Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a 70% fill rate.16 nVent.com/CADDY

Cat HP J-Hook with C Purlin ClipFTØF Requires only a hammer to install Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic Provides superior fill capacity and load rating over most other non-continuous cable support alternatives Rounded edges on J-Hooks provide proper bend radius support for high performance data cables Cost effective alternative to expensive cable tray Complies with EN 50174-2Material: Steel, Spring SteelFinish: Pre-galvanized, ArmourPart NumberAreaCableCapacity,Cat 5eCableCapacity,Cat 6CableCapacity,Cat 6ADiameterØFlangeThicknessFTStatic LoadFCAT16HPVF141.07 in²2015101”1/16” – 1/4”60 lbApprovalscULus CAT21HPVF142.29 in²5040251 5/16”1/16” – 1/4”60 lbcULus CAT32HPVF143.97 in²9060352”1/16” – 1/4”60 lbcULus CAT48HPVF149.26 in²200150803”1/16” – 1/4”60 lbcULus CAT64HPVF1415.48 in²3302201404”1/16” – 1/4”60 lbcULus Non-continuous supports may not exceed spacing of 5’ (1.5 m) per TIA 569-C.9.7.Cable capacity is calculated based on a