Transcription

Ryder Transportation Management1Ryder Transportation EDIElectronic Data InterchangeEDI 214Carrier Shipment Status MessageVersion 004010Document: Version: 3.0Document Date: Nov. 2, 2015Ryder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation Management2214 Motor Carrier Load Tender Transaction Set – IntroductionRyder uses the EDI 214 in order to track the shipment from the supplier to finaldestination. The EDI 214 will contain the status information of the shipment, includingall appointments and exceptions.Functional AcknowledgementRyder will respond to the receipt of each EDI 214 Interchange with an EDI 997. The EDI997 will be sent within 24 hours of the receipt of the EDI 214. Ryder requests that thecarrier receive and reconcile all EDI 997’s. In the event that a 997 is not received within24 hours contact the Ryder EDI group to verify that your EDI 214 data has been receivedand processed.Ryder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation Management3214 Sample DataTLISA*00**00**02*SCAC*01*006922827HUH1 *080903*1132*U*00401*000010067*0*P* 10 ST*214*099510001 B10*4735103*5365205*SCAC L11*5365205*LO L11*01*QN L11*392651*PO L11*392651*PO N1*SH*HUHTAMAKI FSBU N3*5566 NEW VIENNA ROAD N4*NEW VIENNA*OH*45159*US N1*CN*HUHTAMAKI N3*100 HIGGENSON AVE N4*LINCOLN*RI*02865*US LX*1 AT7***AA*NA*20080903*16000000*ET MS1*NEW VIENNA*OH*US AT8*G*L*6240*402 EFI*ZZ*NAME SE*17*099510001 LTLISA*00**00**02*SCAC*01*006922827USP1 *080903*1132*U*00401*000020832*0*P* L11*1000713*POL11*5335266*LON1*SH*USPSN3*500 SW GARY ORMSBY DRN4*TOPEKA*KS*66624N1*CN*MAINT STOCKRMN3*7540 E 53RD *ZZ*NAMESE*15*208320001-Ryder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation Management4214 Transportation Carrier Shipment StatusMessageFunctional Group ID QMIntroduction:This Draft Standard for Trial Use contains the format and establishes the data contents of theTransportation Carrier Shipment Status Message Transaction Set (214) for use within the context of anElectronic Data Interchange (EDI) environment. This transaction set can be used by a transportation carrierto provide shippers, consignees, and their agents with the status of shipments in terms of dates, times,locations, route, identifying numbers, and ion Set HeaderM1M020B10M1M030L11Beginning Segment for Transportation CarrierShipment Status MessageBusiness Instructions and Reference NumberM300Max.UseLOOP ID - 0100050N1NameM1M070N3Address InformationM2M080N4Geographic LocationM1LOOP ID - 0200130LX999999Assigned NumberM1LOOP ID - 020510M140AT7Shipment Status DetailsM1M143MS1M1146MS2Equipment, Shipment, or Real PropertyLocationEquipment or Container Owner and TypeO1M200AT8Shipment Weight, Packaging and Quantity DataM10M610SETransaction Set TrailerM1Ryder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Notes andComments10MMLoopRepeatProprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:5ST Transaction Set Header010Mandatory1To indicate the start of a transaction set and to assign a control number1The transaction set identifier (ST01) is used by the translation routines ofthe interchange partners to select the appropriate transaction set definition(e.g., 810 selects the Invoice Transaction Set).Comments:MRef.Des.AttributesST01MST02Data Element SummaryDataElement Name143329Transaction Set Identifier CodeM ID 3/3Code uniquely identifying a Transaction SetTransaction Set Control NumberM AN 4/9Identifying control number that must be unique within the transaction setfunctional group assigned by the originator for a transaction setRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:Comments:6B10 Beginning Segment for Transportation Carrier Shipment StatusMessage020Mandatory1To transmit identifying numbers and other basic data relating to the transactionset1 At least one of B1001 or B1006 is required.2 Only one of B1001 or B1005 may be present.3 If either B1005 or B1006 is present, then the other is required.1 B1001 is the carrier assigned reference number.2 B1007 indicates if the reference numbers included in this transmission weretransmitted to the carrier via EDI or key entered by the carrier. A "Y"indicates that the carrier received the reference numbers in an EDItransmission; an "N" indicates that the carrier did not receive the referencenumbers in an EDI transmission and key entered the data from a shippersupplied document.1 B1001 is the carrier's PRO (invoice number) that identifies the shipment.2 B1003 is required when used in Transaction Set 214.3 B1006 is the carrier assigned bar code identification or another carrierassigned shipment identification, such as a manifest number.Data Element SummaryDataElement eference IdentificationM AN 1/30Reference information as defined for a particular Transaction Set or asspecified by the Reference Identification QualifierCarrier Pro/Invoice Number as sent in the N9 02 on the EDI 990. Sent In TheL11 01 With A CN Qualifier In The L11 02 On The EDI 204Shipment Identification NumberM AN 1/30Identification number assigned to the shipment by the shipper that uniquelyidentifies the shipment from origin to ultimate destination and is not subject tomodification; (Does not contain blanks or special characters)Standard Carrier Alpha CodeM ID 2/4Standard Carrier Alpha CodeRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:7L11 Business Instructions and Reference Number030Mandatory300To specify instructions in this business relationship or a reference number1 At least one of L1101 or L1103 is required.2 If either L1101 or L1102 is present, then the other is required.Semantic Notes:Comments:Data Element SummaryDataElement ference IdentificationM AN 1/30Reference information as defined for a particular Transaction Set or asspecified by the Reference Identification QualifierReference Identification QualifierM ID 2/3Code qualifying the Reference IdentificationAOAppointment NumberConsignee Confirmation NumberBMBill of Lading NumberShould be sent in the B10.02LOLoad Planning NumberRyder Load Number. Sent in the B2.04 in the EDI 204POPurchase Order NumberCustomer PO. Sent in the L11.01 with DJ qualfier inthe L11.02 on the EDI 204QNStop Sequence NumberStop Number, 1 is the Pick-up. Increment eachadditional stop by 1 thereafter.DescriptionX AN 1/80A free-form description to clarify the related data elements and their contentRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:Comments:N1 Name0500100MMandatoryMandatory1To identify a party by type of organization, name, and code1 At least one of N102 or N103 is required.2 If either N103 or N104 is present, then the other is required.12Ref.Des.AttributesN1018This segment, used alone, provides the most efficient method of providingorganizational identification. To obtain this efficiency the "ID Code"(N104) must provide a key to the table maintained by the transactionprocessing party.N105 and N106 further define the type of entity in N101.Data Element SummaryDataElement Name98N10293N10366N10467Entity Identifier CodeM ID 2/3Code identifying an organizational entity, a physical location, property or anindividualCNConsigneeSHShipperNameX AN 1/60Free-form nameIdentification Code QualifierX ID 1/2Code designating the system/method of code structure used for IdentificationCode (67)94Code assigned by the organization that is the ultimatedestination of the transaction setIdentification CodeX AN 2/80Code identifying a party or other codeRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:Comments:MRef.Des.AttributesN301N3029N3 Address Information0700100MandatoryMandatory2To specify the location of the named partyData Element SummaryDataElement Name166166Address InformationAddress informationAddress InformationAddress informationRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of RyderMAN 1/55OAN 1/5511/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:Comments:N4 Geographic Location0800100MandatoryMandatory1To specify the geographic place of the named party1 If N406 is present, then N405 is required.12Ref.Des.AttributesN40110A combination of either N401 through N404, or N405 and N406 may beadequate to specify a location.N402 is required only if city name (N401) is in the U.S. or Canada.Data Element SummaryDataElement Name19N402156N403116N40426City NameO AN 2/30Free-form text for city nameState or Province CodeO ID 2/2Code (Standard State/Province) as defined by appropriate government agencyPostal CodeO ID 3/15Code defining international postal zone code excluding punctuation and blanks(zip code for United States)Country CodeO ID 2/3Code identifying the countryRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:Comments:MRef.Des.AttributesLX0111LX Assigned Number1300200MandatoryMandatory1To reference a line number in a transaction setData Element SummaryDataElement Name554Assigned NumberNumber assigned for differentiation within a transaction setRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of RyderMN0 1/611/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:12AT7 Shipment Status Details1400205MandatoryMandatory1To specify the status of a shipment, the reason for that status, the date and timeof the status and the date and time of any appointments scheduled.1 Only one of AT701 or AT703 may be present.2 If either AT701 or AT702 is present, then the other is required.3 If either AT703 or AT704 is present, then the other is required.4 If AT706 is present, then AT705 is required.5 If AT707 is present, then AT706 is required.1 If AT701 is present, AT705 is the date the status occurred. If AT703 ispresent, AT705 is a date related to an appointment.If AT701 is present, AT706 is the time of the status. If AT703 is present,AT706 is the time of the appointment.2 If AT707 is not present then AT706 represents local time of the status.Comments:MRef.Des.AttributesAT701Data Element SummaryDataElement Name1650Shipment Status CodeM ID 2/2Code indicating the status of a shipmentAt a minimum the carrier must be able to support the AF (Pick Up) and D1(Delivered) status codes. If you are unable to support either of these statuscodes contact Ryder EDI so that you may be implemented on Ryder's webenabled tendering and status update applications.The D1 and AF status codes are to be used for the actual event. These two codeevents are to be used to record the actual event day and time and will be used toupdate Ryder's tracking site accordingly.A9AFAGCDD1J1K1L1OOP1PRR1S1Ryder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Shipment DamagedCarrier Departed Pick-up Location with ShipmentEstimated DeliveryCarrier Departed Delivery LocationCompleted Unloading at Delivery LocationDelivered to Connecting LineArrived at CustomsLoadingPaperwork Received - Did not Receive Shipment orEquipmentDeparted Terminal LocationU.S. Customs Hold at In-Bond LocationReceived from Prior CarrierTrailer Spotted at Consignee's LocationProprietary Property of Ryder11/2/2015

Ryder Transportation ManagementMAT7021651MAT703165213SDShipment DelayedX1Arrived at Delivery LocationX3Arrived at Pick-up LocationX4Arrived at Terminal LocationX5Arrived at Delivery Location Loading DockX6En Route to Delivery LocationShipment Status or Appointment Reason CodeM ID 2/2Code indicating the reason a shipment status or appointment reason wastransmittedA2Incorrect AddressADCustomer Requested Future DeliveryAGConsignee RelatedAHDriver RelatedAJOther Carrier RelatedAMShipper RelatedANHoliday - ClosedAOWeather or Natural Disaster RelatedAQRecipient Unavailable - Delivery DelayedASHold Due to Customs Documentation ProblemsAXInsufficient Pick-up TimeAYMissed Pick-upB1Consignee ClosedB2Trap for CustomerB5Held for ConsigneeB8Improper Unloading Facility or EquipmentBBHeld per ShipperBDBorder ClearanceBFCarrier Keying ErrorBHInsufficient Time to Complete DeliveryBMFlatcar ShortageBPLoad ShiftedBQShipment OverweightBSRefused by CustomerC5Customer StrikeD1Carrier Dispatch ErrorD2Driver Not AvailableHBHeld Pending AppointmentNSNormal StatusP4Held for Full Carrier LoadRCReconsignedS1Delivery ShortageT7Insufficient Delivery TimeShipment Appointment Status CodeM ID 2/2Code indicating the status of an appointment to pick-up or deliver a shipmentAt a minimum the carrier must be able to support the AB (DeliveryAppointment) and AA (Pick Up Appointment) status code. If you are unable toRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation Management14support this status code contact Ryder EDI so that you may be implemented onRyder's web enabled tendering and status update 23Pick-up Appointment Date and/or TimePick Up Appointments Are Expected As Soon As TheyAre MadeABDelivery Appointment Date and/or TimeDelivery Appointments Are Expected As Soon As TheyAre MadeShipment Status or Appointment Reason CodeM ID 2/2Code indicating the reason a shipment status or appointment reason wastransmittedNANormal AppointmentDateM DT 8/8Date expressed as CCYYMMDDTimeM TM 4/8Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, orHHMMSSD, or HHMMSSDD, where H hours (00-23), M minutes (0059), S integer seconds (00-59) and DD decimal seconds; decimal secondsare expressed as follows: D tenths (0-9) and DD hundredths (00-99)Time CodeM ID 2/2Code identifying the time. In accordance with International StandardsOrganization standard 8601, time can be specified by a or - and an indicationin hours in relation to Universal Time Coordinate (UTC) time; since is arestricted character, and - are substituted by P and M in the codes that followATAlaska TimeCTCentral TimeETEastern TimeLTLocal TimeMTMountain TimePTPacific TimeRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:15MS1 Equipment, Shipment, or Real Property Location1430205MandatoryMandatory1To specify the location of a piece of equipment, a shipment, or real property interms of city and state or longitude and latitude1 If MS101 is present, then at least one of MS102 or MS103 is required.2 Only one of MS101 or MS104 may be present.3 If MS102 is present, then MS101 is required.4 If MS103 is present, then MS101 is required.5 If either MS104 or MS105 is present, then the other is required.6 If MS106 is present, then MS104 is required.7 If MS107 is present, then MS105 is required.1 MS104 is the longitude expressed in Degrees, Minutes, and Seconds.2 MS105 is the latitude expressed in Degrees, Minutes, and Seconds.3 MS106 may only be 'E' or 'W'.4 MS107 may only be 'N' or 'S'.Comments:Ref.Des.AttributesMS101Data Element SummaryDataElement ty NameX AN 2/30Free-form text for city nameState or Province CodeX ID 2/2Code (Standard State/Province) as defined by appropriate government agencyCountry CodeX ID 2/3Code identifying the countryLongitude CodeX ID 7/7Code indicating the longitude in degrees (3 positions), minutes (2 positions),and seconds (2 positions)Latitude CodeX ID 7/7Code indicating the latitude in degrees (3 positions), minutes (2 positions),seconds (2 positions)Direction Identifier CodeO ID 1/1Code identifying geographic directionRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:Comments:Ref.Des.AttributesMS20116MS2 Equipment or Container Owner and Type1460205MandatoryOptional1To specify the owner, the identification number assigned by that owner, and thetype of equipment1 If either MS201 or MS202 is present, then the other is required.2 If MS204 is present, then MS202 is required.1MS203 identifies the type for the equipment specified in MS202.Data Element SummaryDataElement Name140MS202207MS20340MS204761Standard Carrier Alpha CodeX ID 2/4Standard Carrier Alpha CodeEquipment NumberX AN 1/10Sequencing or serial part of an equipment unit's identifying number (purenumeric form for equipment number is preferred)Equipment Description CodeO ID 2/2Code identifying type of equipment used for shipmentEquipment Number Check DigitO N0 1/1Number which designates the check digit applied to a piece of equipmentRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI 214 Standard Version 004010Proprietary Property of Ryder11/2/2015

Ryder Transportation ManagementSegment:Position:Loop:Level:Usage:Max Use:Purpose:Syntax Notes:Semantic Notes:17AT8 Shipment Weight, Packaging and Quantity Data2000200MandatoryMandatory10To specify shipment details in terms of weight, and quantity of handling units1 If any of AT801 AT802 or AT803 is present, then all are required.2 If either AT806 or AT807 is present, then the other is required.1 AT804 is the quantity of handling units that are not unitized (for example acarton). When added to the quantity in AT805, it is the total quantity ofhandling units in the shipment.2 AT805 is the quantity of handling units that are unitized (for example on apallet or slip sheet). When added to the quantity in AT804 it is the totalquantity of handling units for the shipment.Comments:Data Element SummaryDataElement 480AT806184AT807183187Weight QualifierCode defining the type of weightAConsolidated WeightA1Dimensional WeightBBilled WeightFDeficit WeightGGross WeightWeight Unit CodeCode specifying the weight unitKKilogramsLPoundsWeightNumeric value of weightLading QuantityNumber of units (pieces) of the lading commodityVolume Unit QualifierCode identifying the volume unitECubic FeetVolumeValue of volumetric measureRyder Enterprise Production Version 3.0Completed by Anthony CosenzaEDI